Fire-rated roller shutters in Rochester
Rochester is roughly 8 miles north of Maidstone.
If a fire shutter at your premises in Rochester has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
Where a fire shutter is part of new building work in Rochester, the approval route and the product evidence are confirmed before anything is ordered.
We cover Rochester and the ME1 postcode district as part of Kent; you book a survey here exactly as you would anywhere else. Chatham, Strood and Gillingham are covered too, which helps when several properties need doing.
What can you choose in Rochester?
The main choices for fire-rated roller shutters in Rochester:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for Rochester
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Rochester too; the survey confirms the size and specification before you get a fixed price.
Rules that apply in Rochester
Rochester is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Free survey
We measure the opening and the space around it, and check fixings and power.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Do you cover Rochester?
Yes, we survey and fit in Rochester (ME1) as part of our Kent coverage.
Do I need permission for fire-rated roller shutters in Rochester?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.