Fire-rated roller shutters in Tunbridge Wells
Whether your property is in the centre of Tunbridge Wells or on its edges, it is included in our Kent coverage. Neighbouring towns we cover include Tonbridge (4 miles away), Crowborough and Sevenoaks.
Tunbridge Wells is roughly 14 miles south-west of Maidstone.
Fire shutters for buildings in Tunbridge Wells are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Tunbridge Wells.
Specifying fire-rated roller shutters for Tunbridge Wells
Decisions we make with you at the survey in Tunbridge Wells:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Prices for fire-rated roller shutters in Tunbridge Wells
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Tunbridge Wells is fixed in writing after survey.
What to check in Tunbridge Wells before ordering
Tunbridge Wells is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Questions about fire-rated roller shutters in Tunbridge Wells
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
How much do fire-rated roller shutters cost in Tunbridge Wells?
The guide prices above apply in Tunbridge Wells. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.
Is the survey free in Tunbridge Wells?
For new shutters, yes. Repair visits in Tunbridge Wells are charged because they include diagnosis and work on the day.