Fitting fire-rated roller shutters in Whitstable
Whitstable is roughly 23 miles east of Maidstone.
Fire shutters for buildings in Whitstable are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Whitstable.
If your address has a CT5 postcode, it falls within our Kent coverage. We also cover Herne Bay, Canterbury and Faversham, so premises in more than one of these places can be quoted together.
Options for fire-rated roller shutters in Whitstable
Options we specify for properties in Whitstable:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Guide prices for Whitstable
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Whitstable can move the figure up or down, and the survey settles it.
Rules that apply in Whitstable
Whitstable is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
How it works in Whitstable
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Frequently asked questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How much do fire-rated roller shutters cost in Whitstable?
We use the same UK guide prices in Whitstable; after the survey you get a fixed written price for your opening.
Do you cover Whitstable?
Yes. Whitstable and the CT5 postcode district are part of our coverage across Kent.