Fire-rated roller shutters in Lancashire

Looking at fire-rated roller shutters in Lancashire? We survey, quote in writing, make to measure and fit, and we can service and repair the shutter later.

A fire-rated roller shutter is a steel shutter tested to hold back fire for a set time, such as 60, 120 or 240 minutes, in an opening in a fire-resisting wall. We survey and fit across Lancashire, including Preston, Burnley, Blackburn.

From £3,495 + VAT

Fire-rated roller shutters across Lancashire

From Preston outwards, we survey and fit fire-rated roller shutters for commercial and public buildings across Lancashire.

We have local pages for 18 towns in Lancashire, starting with Preston. Neighbouring areas we also cover include Greater Manchester, Merseyside, Cheshire.

If a fire shutter at your premises in Lancashire has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.

Towns we cover in Lancashire include:

Which options suit you?

What you can choose when we survey in Lancashire:

RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
TypeFull-height shutters, or fire-rated counter shutters for hatches.
ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.

How much do fire-rated roller shutters cost in Lancashire?

Fire-rated roller shutters	Ex VAT	Inc VAT
Fire shutter around 3,000 × 3,000 mm	£3,495 – £7,995	£4,195 – £9,595
Fire-rated counter shutter	£1,495 – £2,995	£1,795 – £3,595
Fire shutter service including drop test, per shutter	£125 – £245	£150 – £295

Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.

Use these as a starting point for budgeting in Lancashire; the written quotation after survey is the price that counts.

Rules that apply in Lancashire

Planning questions anywhere in Lancashire go to your local planning authority (the district, borough, city or unitary council).

Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.

How it works

Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.