Fire-rated roller shutters in Market Harborough
If your address has an LE16 postcode, it falls within our Leicestershire coverage. Neighbouring towns we cover include Corby (10 miles away), Kettering and Wigston.
For reference, Market Harborough lies about 14 miles south-east of Leicester.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Market Harborough comes with that product's test evidence.
Fire shutters for buildings in Market Harborough are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
Specifying fire-rated roller shutters for Market Harborough
Options we specify for properties in Market Harborough:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Market Harborough
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Market Harborough; the written quotation after survey is the price that counts.
Rules that apply in Market Harborough
In Market Harborough, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Fire-rated roller shutters in Market Harborough: questions
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
How much do fire-rated roller shutters cost in Market Harborough?
The guide prices above apply in Market Harborough. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.
Do I need permission for fire-rated roller shutters in Market Harborough?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.