Fire-rated roller shutters in Boston
Boston is part of our Lincolnshire coverage, and addresses in the PE21 postcode district are covered in the same way as the rest of Lincolnshire. Spalding, Skegness and Wisbech are covered too, which helps when several properties need doing.
For reference, Boston lies about 27 miles south-east of Lincoln.
If a fire shutter at your premises in Boston has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
Fire shutters for buildings in Boston are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
Which options suit you?
What you can choose when we survey in Boston:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Prices for fire-rated roller shutters in Boston
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Boston; the written quotation after survey is the price that counts.
What to check in Boston before ordering
In Boston, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
How it works in Boston
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Free survey
We measure the opening and the space around it, and check fixings and power.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Fire-rated roller shutters in Boston: questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
How much do fire-rated roller shutters cost in Boston?
The guide prices above apply in Boston. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.
Do I need permission for fire-rated roller shutters in Boston?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.