Our fire-rated roller shutters service in Formby
Whether your property is in the centre of Formby or on its edges, it is included in our Merseyside coverage. Other towns nearby that we cover include Maghull, Southport and Bootle.
For reference, Formby lies about 11 miles north of Liverpool.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Formby comes with that product's test evidence.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Formby.
Specifying fire-rated roller shutters for Formby
Ways to specify fire-rated roller shutters for Formby:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for fire-rated roller shutters in Formby
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Formby is fixed in writing after survey.
Rules that apply in Formby
As an English town, Formby follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
What happens next
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Fire-rated roller shutters in Formby: questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
How much do fire-rated roller shutters cost in Formby?
Typical prices are shown above. A survey at your property in Formby confirms the specification and fixes the price.
Do I need permission for fire-rated roller shutters in Formby?
Possibly. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). We recommend checking with your local council first.