Fire-rated roller shutters across Shropshire
Fire-rated roller shutters for commercial and public buildings in Shropshire, measured on site and fitted to the survey.
We have local pages for 6 towns in Shropshire, starting with Shrewsbury. Neighbouring areas we also cover include West Midlands, Staffordshire, Worcestershire.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Shropshire.
Towns we cover in Shropshire include:
- Fire shutters in Telford
- Fire shutters in Shrewsbury
- Fire shutters in Wellington
- Fire shutters in Bridgnorth
- Fire shutters in Ludlow
- Fire shutters in Oswestry
Which options suit you?
What you can choose when we survey in Shropshire:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
How much do fire-rated roller shutters cost in Shropshire?
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Shropshire is fixed in writing after survey.
Rules that apply in Shropshire
Across Shropshire, planning follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
How it works
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Fire-rated roller shutters in Shropshire: questions
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Do I need permission for fire-rated roller shutters in Shropshire?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.
How much do fire-rated roller shutters cost in Shropshire?
The guide prices above apply in Shropshire. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.