Our fire-rated roller shutters service in Burntwood
Burntwood sits some 25 miles to the south-east of Stoke-on-Trent.
Fire shutters for buildings in Burntwood are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
If a fire shutter at your premises in Burntwood has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
We survey and install across Staffordshire, and Burntwood is one of the towns covered. We also cover Lichfield, Cannock and Aldridge, so premises in more than one of these places can be quoted together.
Options for fire-rated roller shutters in Burntwood
Decisions we make with you at the survey in Burntwood:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Burntwood
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Burntwood can move the figure up or down, and the survey settles it.
What to check in Burntwood before ordering
Burntwood is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Questions about fire-rated roller shutters in Burntwood
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Do I need permission for fire-rated roller shutters in Burntwood?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.
Is the survey free in Burntwood?
Yes, surveys for new installations in Burntwood are free. Repair and service visits are charged.