Fitting fire-rated roller shutters in Sunbury-on-Thames
We cover Sunbury-on-Thames and the TW16 postcode district as part of Surrey; you book a survey here exactly as you would anywhere else. Our coverage around Sunbury-on-Thames also includes Walton-on-Thames, Hampton and Ashford (Surrey).
Sunbury-on-Thames sits some 13 miles to the north-east of Guildford.
Where a fire shutter is part of new building work in Sunbury-on-Thames, the approval route and the product evidence are confirmed before anything is ordered.
If a fire shutter at your premises in Sunbury-on-Thames has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
Options for fire-rated roller shutters in Sunbury-on-Thames
What you can choose when we survey in Sunbury-on-Thames:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Prices for fire-rated roller shutters in Sunbury-on-Thames
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Sunbury-on-Thames; the written quotation after survey is the price that counts.
What to check in Sunbury-on-Thames before ordering
As an English town, Sunbury-on-Thames follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
How it works in Sunbury-on-Thames
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Do I need permission for fire-rated roller shutters in Sunbury-on-Thames?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.
Is the survey free in Sunbury-on-Thames?
For new shutters, yes. Repair visits in Sunbury-on-Thames are charged because they include diagnosis and work on the day.