Fire-rated roller shutters in Kingswinford
Kingswinford is roughly 11 miles west of Birmingham.
Fire shutters for buildings in Kingswinford are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
We work with your fire alarm contractor in Kingswinford so the shutter closes on the right signal and the interface is tested at handover.
We survey and install across West Midlands, and Kingswinford is one of the towns covered. Our coverage around Kingswinford also includes Brierley Hill, Stourbridge and Dudley.
Which options suit you?
The main choices for fire-rated roller shutters in Kingswinford:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Kingswinford
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Kingswinford; the written quotation after survey is the price that counts.
What to check in Kingswinford before ordering
Kingswinford is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
How it works in Kingswinford
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Do you cover Kingswinford?
Yes, we survey and fit in Kingswinford (DY6) as part of our West Midlands coverage.
Do I need permission for fire-rated roller shutters in Kingswinford?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.