Fire-rated roller shutters in Shirley
For reference, Shirley lies about 6 miles south-east of Birmingham.
Fire shutters for buildings in Shirley are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
If a fire shutter at your premises in Shirley has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
We survey and install across West Midlands, and Shirley is one of the towns covered. Neighbouring towns we cover include Solihull (2 miles away), Birmingham and Smethwick.
Options for fire-rated roller shutters in Shirley
What you can choose when we survey in Shirley:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Shirley
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
These are UK guide prices for supply and fit. Your price in Shirley is fixed in writing after survey.
What to check in Shirley before ordering
As an English town, Shirley follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How much do fire-rated roller shutters cost in Shirley?
Typical prices are shown above. A survey at your property in Shirley confirms the specification and fixes the price.
Do I need permission for fire-rated roller shutters in Shirley?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.