Our fire-rated roller shutters service in Bromsgrove
We survey and install across Worcestershire, and Bromsgrove is one of the towns covered. Neighbouring towns we cover include Redditch (5 miles away), Droitwich and Halesowen.
Bromsgrove sits some 12 miles to the north-east of Worcester.
We work with your fire alarm contractor in Bromsgrove so the shutter closes on the right signal and the interface is tested at handover.
Fire shutters for buildings in Bromsgrove are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
Which options suit you?
The main choices for fire-rated roller shutters in Bromsgrove:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for fire-rated roller shutters in Bromsgrove
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Bromsgrove too; the survey confirms the size and specification before you get a fixed price.
What to check in Bromsgrove before ordering
As an English town, Bromsgrove follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
How it works in Bromsgrove
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Do you cover Bromsgrove?
Yes. Bromsgrove and the B61 postcode district are part of our coverage across Worcestershire.
How much do fire-rated roller shutters cost in Bromsgrove?
We use the same UK guide prices in Bromsgrove; after the survey you get a fixed written price for your opening.