Industrial roller shutter doors in Lerwick
Each industrial door is specified for its own opening, so a site in Lerwick gets a door matched to its size, use and power supply rather than a single standard.
High-cycle openings in Lerwick, such as busy loading bays and forklift routes, are specified with the motor, controls and safety devices to match the traffic.
Lerwick is an island town, so work there is arranged in advance around ferry travel, with surveys and installation scheduled together where possible and travel costs quoted up front.
Specifying industrial roller shutter doors for Lerwick
Decisions we make with you at the survey in Lerwick:
- WindWind hooks or bars in the laths for exposed openings.
- ControlsHold-to-run, push-button, pull cord, radar, loop or remote.
- CurtainSingle-skin galvanised steel, insulated, or with vision laths.
Guide prices for Lerwick
| Industrial roller shutter doors | Ex VAT | Inc VAT |
|---|---|---|
| Loading door around 4,000 × 4,500 mm, steel, electric | £3,295 – £5,995 | £3,955 – £7,195 |
| Insulated door around 4,000 × 4,500 mm, electric | £4,495 – £7,995 | £5,395 – £9,595 |
| Large opening over 6,000 mm wide | £6,995 – £13,995 | £8,395 – £16,795 |
Guide prices, per door, supplied and fitted. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Lerwick can move the figure up or down, and the survey settles it.
Planning and safety in Lerwick
Lerwick is in Scotland, so planning decisions sit with your planning authority (the local council, or a national park authority).
- Power supply: Industrial motors may need a 3-phase supply or a dedicated circuit; we confirm what is on site at survey.
- Workplace safety: Powered doors in workplaces must be safe to use and kept maintained; that includes working safety edges or photocells and regular servicing.
- Lifting and access: Large doors are installed with suitable access equipment and a site-specific method statement.
From survey to fitting
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Free survey
We measure the opening and the space around it, and check fixings and power.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Questions about industrial roller shutter doors in Lerwick
How much does an industrial roller door cost?
A typical 4 × 4.5 m electric steel door is around £3,295–£5,995 plus VAT, supplied and fitted. Insulated doors, larger openings and high-duty motors cost more.
Should I choose insulated or single-skin?
Insulated if the building is heated or you get condensation; single-skin steel for unheated stores, farms and compounds.
Do I need permission for industrial roller shutter doors in Lerwick?
Possibly. New doors on industrial buildings can need planning permission if they change the elevation, and doors in fire compartment walls must suit the fire strategy. We recommend checking with your council first.
Do you cover Lerwick?
Yes, by arrangement. Lerwick is an island town, so visits are planned ahead around the crossing, and any travel cost is quoted in advance.