Roller shutter motor replacement in Ruislip
We carry out roller shutter motor replacement across Greater London, and Ruislip is one of the towns covered. We also carry out roller shutter motor replacement in Northolt, Uxbridge and Harrow.
Ruislip sits some 14 miles to the west of central London.
We work on most makes of domestic, shop and industrial shutter in Ruislip, including ones fitted by other companies.
In Ruislip, as everywhere, a jammed or dropped shutter should not be forced; keep people clear and call us so it can be made safe.
What roller shutter motor replacement can cover in Ruislip
The work usually involved in Ruislip:
- IndustrialDirect-drive gear motors with emergency hand operation.
- ShopTube motors or external drives with key switch.
- DomesticTubular motors for window, door and garage shutters.
Prices for roller shutter motor replacement in Ruislip
| Roller shutter motor replacement | Inc VAT | Ex VAT |
|---|---|---|
| Domestic tubular motor | £295 – £595 | £245 – £495 |
| Shop or commercial tube motor | £715 – £1,435 | £595 – £1,195 |
| Industrial side-mounted gear motor | £1,075 – £2,275 | £895 – £1,895 |
Guide prices, per motor, supplied and fitted. VAT at 20% where it applies.
Use these to budget in Ruislip; parts and any extra work are confirmed with you on the day before we go ahead.
Rules that apply in Ruislip
In Ruislip, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Electrical work: Motors are wired to BS 7671; any change to the supply is done by a qualified electrician.
How it works in Ruislip
Describe the problem
What the shutter is doing, what it is made of and roughly when it was fitted, with photos if possible.
Engineer visit
We inspect the shutter, controls and safety devices and confirm what is needed.
Your go-ahead
You approve any parts or extra work before we carry it out.
Work done, report left
The shutter is tested after the work and you get a record of what was found and done.
Roller shutter motor replacement in Ruislip: questions
Can I replace the motor without replacing the shutter?
Yes, in most cases. The motor slides out of the barrel or unbolts from the side.
How do I know if my shutter motor has failed?
If the shutter hums but does not move, stops part way, or does nothing when the power and switch are fine, the motor or its limits are the likely cause. We test before replacing.
Do you charge for a visit in Ruislip?
Yes. Repair and service visits are charged at the rate we give you when you book. Surveys for new installations are free.
Do you work on shutters fitted by other companies?
Yes, most makes and ages of shutter; photos and any labels help us bring the right parts to Ruislip.