Fitting fire-rated roller shutters in Wrexham
If your address has an LL11 postcode, it falls within our Clwyd coverage. Other towns nearby that we cover include Buckley, Deeside and Mold.
We work with your fire alarm contractor in Wrexham so the shutter closes on the right signal and the interface is tested at handover.
If a fire shutter at your premises in Wrexham has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
What can you choose in Wrexham?
What you can choose when we survey in Wrexham:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Wrexham
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Wrexham too; the survey confirms the size and specification before you get a fixed price.
Rules that apply in Wrexham
In Wrexham, as elsewhere in Wales, planning questions go to your local planning authority (the county or county borough council, or a national park authority).
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building regulations approval is needed from local authority building control.
How it works in Wrexham
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Questions about fire-rated roller shutters in Wrexham
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Do you cover Wrexham?
Yes. Book a survey for any address in Wrexham in the usual way; it is covered as part of Clwyd.
How much do fire-rated roller shutters cost in Wrexham?
We use the same UK guide prices in Wrexham; after the survey you get a fixed written price for your opening.