Our fire-rated roller shutters service in Consett
Consett is roughly 11 miles north-west of Durham.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Consett comes with that product's test evidence.
Where a fire shutter is part of new building work in Consett, the approval route and the product evidence are confirmed before anything is ordered.
Consett is part of our County Durham coverage, and addresses in the DH8 postcode district are covered in the same way as the rest of County Durham. Other towns nearby that we cover include Stanley, Chester-le-Street and Durham.
Options for fire-rated roller shutters in Consett
Ways to specify fire-rated roller shutters for Consett:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Prices for fire-rated roller shutters in Consett
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Consett can move the figure up or down, and the survey settles it.
What to check in Consett before ordering
As an English town, Consett follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
From survey to fitting
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
How much do fire-rated roller shutters cost in Consett?
The guide prices above apply in Consett. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.
Is the survey free in Consett?
Yes, surveys for new installations in Consett are free. Repair and service visits are charged.