Our fire-rated roller shutters service in Derby
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Derby comes with that product's test evidence.
Where a fire shutter is part of new building work in Derby, the approval route and the product evidence are confirmed before anything is ordered.
We survey and install across Derbyshire, and Derby is one of the cities covered. Belper, Ilkeston and Heanor are covered too, which helps when several properties need doing.
Options for fire-rated roller shutters in Derby
What you can choose when we survey in Derby:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for fire-rated roller shutters in Derby
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Derby can move the figure up or down, and the survey settles it.
Planning and safety in Derby
As an English city, Derby follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
How it works in Derby
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Fire-rated roller shutters in Derby: questions
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How much do fire-rated roller shutters cost in Derby?
The guide prices above apply in Derby. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.
Do I need permission for fire-rated roller shutters in Derby?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.