Fire-rated roller shutters in Bearsden
We cover Bearsden and the G61 postcode district as part of Dunbartonshire & Argyll; you book a survey here exactly as you would anywhere else. We also cover Clydebank, Renfrew and Bishopbriggs, so premises in more than one of these places can be quoted together.
Bearsden is roughly 10 miles east of Dumbarton.
If a fire shutter at your premises in Bearsden has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Bearsden.
Options for fire-rated roller shutters in Bearsden
Decisions we make with you at the survey in Bearsden:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for Bearsden
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Bearsden can move the figure up or down, and the survey settles it.
Planning and safety in Bearsden
In Bearsden, as elsewhere in Scotland, planning questions go to your planning authority (the local council, or a national park authority).
- Your duties: In Scotland, the duty holder under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 must keep fire safety measures maintained.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, a building warrant from the council's building standards service is normally needed before work starts.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Free survey
We measure the opening and the space around it, and check fixings and power.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Is the survey free in Bearsden?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.
Do you cover Bearsden?
Yes. Book a survey for any address in Bearsden in the usual way; it is covered as part of Dunbartonshire & Argyll.