Fire-rated roller shutters in Brighton
Conveyor openings, kitchen hatches and doors between warehouse compartments are typical places a fire shutter is needed in commercial buildings in Brighton.
We work with your fire alarm contractor in Brighton so the shutter closes on the right signal and the interface is tested at handover.
If your address has a Brighton postcode, it falls within our East Sussex coverage. Other towns nearby that we cover include Hove, Portslade and Burgess Hill.
Options for fire-rated roller shutters in Brighton
What you can choose when we survey in Brighton:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for Brighton
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Brighton too; the survey confirms the size and specification before you get a fixed price.
What to check in Brighton before ordering
In Brighton, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
How it works in Brighton
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Free survey
We measure the opening and the space around it, and check fixings and power.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Do you cover Brighton?
Yes, we survey and fit in Brighton (BN postcodes) as part of our East Sussex coverage.
Is the survey free in Brighton?
For new shutters, yes. Repair visits in Brighton are charged because they include diagnosis and work on the day.