Our fire-rated roller shutters service in Hove
Hove is roughly 1 mile west of Brighton.
Fire shutters for buildings in Hove are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
We work with your fire alarm contractor in Hove so the shutter closes on the right signal and the interface is tested at handover.
We cover Hove and the BN3 postcode district as part of East Sussex; you book a survey here exactly as you would anywhere else. Neighbouring towns we cover include Brighton (1 mile away), Portslade and Burgess Hill.
Which options suit you?
The main choices for fire-rated roller shutters in Hove:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Prices for fire-rated roller shutters in Hove
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Hove can move the figure up or down, and the survey settles it.
What to check in Hove before ordering
As an English town, Hove follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
What happens next
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Free survey
We measure the opening and the space around it, and check fixings and power.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Fire-rated roller shutters in Hove: questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
Do I need permission for fire-rated roller shutters in Hove?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.
Is the survey free in Hove?
Yes, surveys for new installations in Hove are free. Repair and service visits are charged.