Fire-rated roller shutters in Southend-on-Sea
Southend-on-Sea is roughly 17 miles south-east of Chelmsford.
If a fire shutter at your premises in Southend-on-Sea has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
Fire shutters for buildings in Southend-on-Sea are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
If your address has an SS1 postcode, it falls within our Essex coverage. We also cover Rayleigh, Canvey Island and Benfleet, so premises in more than one of these places can be quoted together.
Specifying fire-rated roller shutters for Southend-on-Sea
What you can choose when we survey in Southend-on-Sea:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Guide prices for Southend-on-Sea
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Southend-on-Sea too; the survey confirms the size and specification before you get a fixed price.
Rules that apply in Southend-on-Sea
In Southend-on-Sea, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
How it works in Southend-on-Sea
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Do I need permission for fire-rated roller shutters in Southend-on-Sea?
It depends on the property. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). Check with your local council before ordering; we can supply drawings.
Do you cover Southend-on-Sea?
Yes, we survey and fit in Southend-on-Sea (SS1) as part of our Essex coverage.