Fire shutters for properties in Yate
Yate is roughly 24 miles south of Gloucester.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Yate comes with that product's test evidence.
Fire shutters for buildings in Yate are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
We cover Yate and the BS37 postcode district as part of Gloucestershire; you book a survey here exactly as you would anywhere else. Kingswood, Bristol and Bath are covered too, which helps when several properties need doing.
Specifying fire-rated roller shutters for Yate
Decisions we make with you at the survey in Yate:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Yate
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Yate can move the figure up or down, and the survey settles it.
Planning and safety in Yate
Yate is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
What happens next
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Made, fitted, handed over
Your shutter is made to measure, fitted, set up and demonstrated.
Frequently asked questions
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
How much do fire-rated roller shutters cost in Yate?
We use the same UK guide prices in Yate; after the survey you get a fixed written price for your opening.
Do you cover Yate?
Yes. Book a survey for any address in Yate in the usual way; it is covered as part of Gloucestershire.