Our fire-rated roller shutters service in Bath
Whether your property is in the centre of Bath or on its edges, it is included in our Somerset coverage. Trowbridge, Kingswood and Frome are covered too, which helps when several properties need doing.
For reference, Bath lies about 41 miles north-east of Taunton.
If a fire shutter at your premises in Bath has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Bath comes with that product's test evidence.
Options for fire-rated roller shutters in Bath
Ways to specify fire-rated roller shutters for Bath:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Bath
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Bath too; the survey confirms the size and specification before you get a fixed price.
Rules that apply in Bath
In Bath, as elsewhere in England, planning questions go to your local planning authority (the district, borough, city or unitary council).
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Free survey
We measure the opening and the space around it, and check fixings and power.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Questions about fire-rated roller shutters in Bath
Will a fire shutter close in a power cut?
Fire shutters are designed to fail safe, closing under gravity at a controlled speed when the release is triggered or power is lost, depending on the system.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
How much do fire-rated roller shutters cost in Bath?
We use the same UK guide prices in Bath; after the survey you get a fixed written price for your opening.
Do you cover Bath?
Yes. Book a survey for any address in Bath in the usual way; it is covered as part of Somerset.