Fire-rated roller shutters in Ilford
Ilford is roughly 9 miles east of central London.
If a fire shutter at your premises in Ilford has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
Where a fire shutter is part of new building work in Ilford, the approval route and the product evidence are confirmed before anything is ordered.
We cover Ilford and the IG1 postcode district as part of Greater London; you book a survey here exactly as you would anywhere else. Other towns nearby that we cover include Barking, Leytonstone and Stratford.
Specifying fire-rated roller shutters for Ilford
Options we specify for properties in Ilford:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Guide prices for Ilford
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in Ilford; the written quotation after survey is the price that counts.
What to check in Ilford before ordering
As an English town, Ilford follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
From survey to fitting
Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Questions about fire-rated roller shutters in Ilford
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Do I need permission for fire-rated roller shutters in Ilford?
Possibly. A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). We recommend checking with your local council first.
How much do fire-rated roller shutters cost in Ilford?
Typical prices are shown above. A survey at your property in Ilford confirms the specification and fixes the price.