Fire-rated roller shutters in Leytonstone
If your address has an E11 postcode, it falls within our Greater London coverage. Other towns nearby that we cover include Walthamstow, Stratford and Ilford.
For reference, Leytonstone lies about 7 miles north-east of central London.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Leytonstone comes with that product's test evidence.
If a fire shutter at your premises in Leytonstone has not been drop-tested in the last year, a service visit can check it, record the result and tell you what it needs.
Specifying fire-rated roller shutters for Leytonstone
Ways to specify fire-rated roller shutters for Leytonstone:
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for fire-rated roller shutters in Leytonstone
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Leytonstone can move the figure up or down, and the survey settles it.
What to check in Leytonstone before ordering
As an English town, Leytonstone follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
What happens next
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Free survey
We measure the opening and the space around it, and check fixings and power.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Frequently asked questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
Do you cover Leytonstone?
Yes, we survey and fit in Leytonstone (E11) as part of our Greater London coverage.
Is the survey free in Leytonstone?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.