Fire shutters for properties in London
Fire shutters for buildings in London are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
Where a fire shutter is part of new building work in London, the approval route and the product evidence are confirmed before anything is ordered.
We survey and install across Greater London, and London is one of the cities covered. Our coverage around London also includes Westminster, Pimlico and Islington.
What can you choose in London?
What you can choose when we survey in London:
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
Guide prices for fire-rated roller shutters in London
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Use these as a starting point for budgeting in London; the written quotation after survey is the price that counts.
What to check in London before ordering
As an English city, London follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
From survey to fitting
Start with a guide price
Our quote tool gives a guide range in a couple of minutes, or just send us the details.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Price in writing
A fixed price for the work described, with the lead time stated.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Fire-rated roller shutters in London: questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Is the survey free in London?
Yes, surveys for new installations in London are free. Repair and service visits are charged.
Do you cover London?
Yes. London and London's postcode districts are part of our coverage across Greater London.