Fire-rated roller shutters in Hertfordshire

We supply and fit fire-rated roller shutters in Hertfordshire, from the first survey to the handover, with guide prices below and a fixed quote after survey.

A fire-rated roller shutter is a steel shutter tested to hold back fire for a set time, such as 60, 120 or 240 minutes, in an opening in a fire-resisting wall. We survey and fit across Hertfordshire, including Watford, Hemel Hempstead, Stevenage.

From £3,495 + VAT

Fire-rated roller shutters across Hertfordshire

From Watford outwards, we survey and fit fire-rated roller shutters for commercial and public buildings across Hertfordshire.

We have local pages for 18 towns in Hertfordshire, starting with Watford. Neighbouring areas we also cover include Bedfordshire, Buckinghamshire, Greater London.

We work with your fire alarm contractor in Hertfordshire so the shutter closes on the right signal and the interface is tested at handover.

Towns we cover in Hertfordshire include:

Options for fire-rated roller shutters in Hertfordshire

What you can choose when we survey in Hertfordshire:

RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
TypeFull-height shutters, or fire-rated counter shutters for hatches.

How much do fire-rated roller shutters cost in Hertfordshire?

Fire-rated roller shutters	Ex VAT	Inc VAT
Fire shutter around 3,000 × 3,000 mm	£3,495 – £7,995	£4,195 – £9,595
Fire-rated counter shutter	£1,495 – £2,995	£1,795 – £3,595
Fire shutter service including drop test, per shutter	£125 – £245	£150 – £295

Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.

Prices are typical for the UK and apply in Hertfordshire too; the survey confirms the size and specification before you get a fixed price.

Rules that apply in Hertfordshire

Across Hertfordshire, planning follows the Town and Country Planning Act 1990 and the permitted development rules in England.

Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.

How it works

Tell us about the opening
Use the quote tool or the form: the type of shutter, rough sizes and any photos.
Survey at the property
A surveyor measures, checks what the box and guides will fix to, and talks through options.
Fixed written price
You get a quotation listing the shutter, controls, fitting and lead time.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.