Our fire-rated roller shutters service in Stevenage
Stevenage sits some 19 miles to the north-east of Watford.
Where a fire shutter is part of new building work in Stevenage, the approval route and the product evidence are confirmed before anything is ordered.
The fire rating belongs to the manufacturer's tested product, so every fire shutter we quote in Stevenage comes with that product's test evidence.
We survey and install across Hertfordshire, and Stevenage is one of the towns covered. Neighbouring towns we cover include Hitchin (5 miles away), Letchworth Garden City and Welwyn Garden City.
What can you choose in Stevenage?
Ways to specify fire-rated roller shutters for Stevenage:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
Guide prices for fire-rated roller shutters in Stevenage
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Guide prices only: access, fixings, power and finish at your property in Stevenage can move the figure up or down, and the survey settles it.
Planning and safety in Stevenage
Stevenage is in England, so planning decisions sit with your local planning authority (the district, borough, city or unitary council).
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
Price in writing
A fixed price for the work described, with the lead time stated.
Installation and handover
We fit, test the controls and safety devices, and leave the documents with you.
Frequently asked questions
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
What does a fire rating mean?
It is the time the tested shutter held back fire in a standard furnace test. The rating applies to the tested product installed as its manufacturer specifies.
Do I need permission for fire-rated roller shutters in Stevenage?
A fire shutter must suit the building's fire strategy, and fire shutters forming part of building work need building control approval (a building warrant in Scotland). If you are unsure, ask your local council; we provide product details for any application.
Is the survey free in Stevenage?
For new shutters, yes. Repair visits in Stevenage are charged because they include diagnosis and work on the day.