Our fire-rated roller shutters service in Frome
Surveys in Frome and the surrounding area are arranged directly with you, as part of our coverage across Somerset. Neighbouring towns we cover include Trowbridge (8 miles away), Bath and Kingswood.
Frome sits some 37 miles to the north-east of Taunton.
Fire shutters for buildings in Frome are specified from the fire strategy: the rating, the release method and how the shutter links to the alarm.
We work with your fire alarm contractor in Frome so the shutter closes on the right signal and the interface is tested at handover.
What can you choose in Frome?
Options we specify for properties in Frome:
- TypeFull-height shutters, or fire-rated counter shutters for hatches.
- ReleaseFusible link, local heat detector or fire alarm interface, as the fire strategy specifies, with fail-safe closing.
- RatingIntegrity ratings typically from 60 up to 240 minutes, depending on the tested product; smoke-rated versions only where tested to BS EN 1634-3.
Guide prices for Frome
| Fire-rated roller shutters | Ex VAT | Inc VAT |
|---|---|---|
| Fire shutter around 3,000 × 3,000 mm | £3,495 – £7,995 | £4,195 – £9,595 |
| Fire-rated counter shutter | £1,495 – £2,995 | £1,795 – £3,595 |
| Fire shutter service including drop test, per shutter | £125 – £245 | £150 – £295 |
Guide prices, supplied and fitted unless stated. VAT at 20% where it applies.
Prices are typical for the UK and apply in Frome too; the survey confirms the size and specification before you get a fixed price.
Planning and safety in Frome
As an English town, Frome follows the Town and Country Planning Act 1990 and the permitted development rules in England.
- Your duties: In England and Wales, the responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire safety equipment, including fire shutters, maintained in good working order.
- Alarm link: Linking a shutter to the fire alarm is coordinated with your alarm contractor so the shutter closes on the right signal; shutters across escape routes are normally released by local heat detection.
- Certification: We supply the manufacturer's test or certification evidence for the product we quote. We do not claim a rating on our own behalf.
- Approvals: Where a fire shutter forms part of building work, such as a new or altered opening in a compartment wall, building control approval is needed, from the council or a registered building control approver.
From survey to fitting
Send the basics
Tell us what the shutter is for and the rough size, with photos if you have them.
Measured on site
Exact sizes, box space, power and controls are confirmed on site.
One clear quotation
Everything included is listed, and nothing is ordered until you accept.
Fitted and explained
Installed, set up and shown to you, with the manufacturer's paperwork.
Questions about fire-rated roller shutters in Frome
Who is responsible for maintaining fire shutters?
The person responsible for fire safety in the building: the responsible person in England and Wales, the duty holder in Scotland or the appropriate person in Northern Ireland.
How often should a fire shutter be tested?
Manufacturers and guidance such as BS 9999 recommend servicing at least once a year, including a drop test. Busy sites or insurers may ask for more often.
Is the survey free in Frome?
Yes, for new installations. We tell you the cost of any repair or service visit before booking.
How much do fire-rated roller shutters cost in Frome?
The guide prices above apply in Frome. Your exact price depends on size, finish, controls and access, and is fixed in writing after survey.
